Clik here to view.
Re: Certification
How to get this Vocher or Login Credentials . Can any one Advise me please.
View ArticleRe: Ignore Last Configuration change line
NCM 7.3. Interestingly, when I went into the Comparison Criteria, the rule to ignore the ! Last Configuration line had been disabled. I know this wasn't done manually so I'm curious how the upgrade...
View ArticleWHD initial set up- Problems with clients logging tickets via portal when the...
Hi Am hoping someone else has come up against this & can provide some ideas as it seems to otherwise be a bit of a hole. We have not yet gone live, I am currently setting up for first use.Our...
View ArticleRe: LEM sensor/analyzer deployment for multiple sites
Hi HolyGuacamole, Yes main concern for this is bandwidth . actually i am not aware of distributed type of deployment. could you please help me to understand that what is sensor and what is analyzer...
View ArticleRe: LEM sensor/analyzer deployment for multiple sites
Sensor and Analyzer are not really LEM terms. But if you look at the architecture, we are saying you can place a Syslog server in a remote location to capture the raw logs from the devices in that...
View ArticleClik here to view.
Powershell Component Graphs
Call me thick but I'm really struggling to get any graphs to work for two Powershell scripts we've got monitoring last file write time, in minutes, and the number of used and available Citrix Licences....
View ArticleRe: LEM sensor/analyzer deployment for multiple sites
Thanks HolyGuacamole, please let me know about some points: > All the agents that are installed on syslog server, will be licensed based?> what will be the compression ratio(a rough idea)>All...
View ArticleRe: LEM sensor/analyzer deployment for multiple sites
1. The agent installed on the syslog server will need 1 node license. If you have say 10 routers in a remote location sending logs to central LEM server, it would use 10 node licenses. By using a...
View ArticleRe: LEM sensor/analyzer deployment for multiple sites
Great HolyGuacamole, > According to evaluation guide, only one source is sending logs. if we have multiple source at each location then should we create seperate-2 connectors and set the log...
View ArticleClik here to view.
IBM DB2 monitoring
HI, I am not able to monitor IBM DB2 Parameters in SAM Steps Followed -1. Installed appropriate ODBC drive on SAM server & I am able to connect remote DB2 database successfully.2. Configured...
View ArticleBasic Alert Help for Interface Down (Management IP of device not returned)
I am using Basic Alert for Interface down (monitoring Interface Status) to send an email out with host name, ip address and interface information in the subject field: Subject: Interface ${Caption} on...
View ArticleRe: Re: Help with regular expressions and config change reports
Tim, I've been attempting to modify the Config file to fix the Running Config vs Startup Config conflict but I keep getting Connectivity issues discarding Config file.device IP:XXX.XXX.XXX.XXX.I've...
View ArticleUpdating Additional Polling Engines
I'm new to an environment where we will be upgrading NPM, NCM and IPam, perhaps uninstalling NTA, and then adding SAM, WPM and VMan. This environment currently has two additional polling engines, and...
View ArticleRe: Service Broker data not included
Here's what I'm using since we upgraded to 9: AND s.spid LIKE '%'union allSELECT s1.loginame ,DB_NAME(s1.dbid) NAME ,s1.hostname ,s1.program_name ,isnull(r.sql_handle, s1.sql_handle) as sql_handle...
View ArticleReset SQL Hash names
Hello,Is there a procedure for resetting the names of SQL hashes stored in the database? I'd like to re-use some of the names.
View ArticleRe: Appinsight for exchange stopped working
Hi, Im having the same issue after installation of CU6 for Exchange 2013. I've checked powershell permissions are ok, but i still get a Connecting tothte remote server failed with the following error:...
View Articleneed help for government job interview
Hi all,I had recently applied for government job for the position of "service desk" and fortunately have been selected for an interview, this is the first time I've reached to this stage and I am very...
View ArticleRe: Application Status Alerts
All good now.Holy put me in the right direction and by using the Variables was able to adjust the Alert Subject.
View ArticleRe: Reset SQL Hash names
Jason, have you tried renaming the SQL hash from the UI? From the trend page or timeslice tab, you can click on the name represented on the right hand side and either remove the name altogether (that...
View Article