Re: SAM and NPM
SolarWinds Server & Application Monitor (SAM) is primarily used for monitoring the performance, health and availability of commercial and opensource applications, in addition to custom application...
View ArticleRe: NPM 10.7 Beta 1 Available
Is it just me or is the interface mode (access/trunk) missing the mark on quite a few?Layer 2 interfaces with L2 channel-groups not showing as mode access Some layer 2 trunks (switchport mode trunk)...
View ArticleRe: Utilization Alerts Will Not Repeat (Not Resetting?)
No worries. I have 2 email alerts for our external site links. One for incoming, the other for outgoing. I basically monitor the link and alert if utilization is over 90% continously for 10 mins. And I...
View ArticleRe: Alert/notification when routing table change
First make sure that something is being created in the log for when you loose a link. Take a note of the message and then go to your Orion server and open Syslog viewer. Then click on View and select...
View ArticleRe: SAM and NPM
Hi aLTeReGo, thanks for your reply =] From my understanding, SAM would still be able to monitor my network infrastructure without the use of NPM right?But am I right to say that for issues like...
View ArticleRe: NPM 10.7 Beta 1 Available
They know that already. But they discard it for years for .
View ArticleRe: NPM 10.7 Beta 1 Available
The entire page refreshing is too old school. It should be a dynamic page like google maps does, It should just updates the section that changes. Is it so hard to do it? Come on guys... Waited too much...
View ArticleClik here to view.
Re: Tabular Power Supply Poller for Cisco 3750 Stacks - not reporting proper...
Hi,It looks like that device return incorrect data for Switch 2 and 3. You may check that by creating new Universal Device Poller:- Into OID paste "1.3.6.1.4.1.9.9.13.1.5.1.3" or...
View ArticleBlackberry Email delivery
Hello Friends, I have a question About SAM module used to test BB end user experience. We tested BB email delivery feature using SAM module but i have some doubts:-1) Is physical BB device a must to...
View ArticleRe: When will your SCP badge be added to your profile?
WooHoo! I just passed (literally a few minutes ago) the SCP exam! Excited to show off my solarwinds skillz. I know badges and kits take time and appreciate all the effort of patrick.hubbard and the...
View ArticleClik here to view.
Re: Cisco UCS | Advice on configuring alerts
You need to limit the highlighted area. (or just remove it entirely as the UCSStatus will only apply to UCS devices, which is what I assume you want)
View ArticleClik here to view.
npm show rtr outgoing discard, the rtr show none, why??
on the closed network, NPM is showing 1000's of transmit discard on my wan link, none receive discards on the same linkon the end side, i do not see any error on my rtr that NPM shows errors , i...
View ArticleRe: Orion SDK Information
We're working on finishing up the 1.8 SDK update, but I don't have a date for you. In general the tools in the SDK 1.7 should connect to NPM 10.6 just fine.
View ArticleRe: Can't able to see the Egress Traffic on Router
Hi Santos, I got reply from ISP, it was configuration issue. interface FastEthernet0/0ip address X.X.X.X. 255.255.255.XXX secondaryip address X.X.X.X 255.255.255.XXXip access-group 110 in --...
View ArticleServer installed with NPM v10.4 is sluggish after some time
The server only has NPM installed and it becomes sluggish, after a yr. Any ideas how to improve the performance? Windows update were performed on the server every quarter of the year.
View ArticleRe: Server installed with NPM v10.4 is sluggish after some time
Database settings are as follows: Auditing Trail Retention: 180 daysDetailed Statistics Retention: 7 daysHourly Statistics Retention: 30 daysDaily Statistics Retention: 180 days NPM is only monitoring...
View ArticleClik here to view.
Re: AC 1.1.1 Upgrade, email quit working
Hi, Scott. Do you try re-check integrity with your IntegrationEmail.Try Setting>> Getting Started Wizard>> Next>> Test ConnectionDo you pass green on SMTP send test? Restart of...
View ArticleRe: Netflow data not showing up in solarwinds
Cisco 6509 switch ip flow-cache timeout active 1ip flow ingress layer2-switched vlan 701mls netflow interfacemls flow ip interface-fullno mls flow ipv6 ip flow-export source Vlan701ip flow-export...
View ArticleRe: Ops Center and Monitor tabs empty
A bit of extra info, the server is still logging events, but they're just not showing up in the tabs I mentioned.
View Article