Re: Group by custom attribute and report statistics - Report Writer
This looks great! Anyway you could include the month/year in the report? Thank you.
View ArticleRe: Does APM_HardwareItems table have current updated values?
Your select will work, but you should add AND IsDisabled=0 AND IsDeleted=0 to WHERE condition. IsDisabled=0 means the HWHealth poller is assigned to node right now and IsDeleted=0 means, the sensor...
View ArticleRe: Adv Alerts based on Syslog messages?
Hi Simon,I am also using alerts generated based on syslog and also from snmp traps.Alerts can be configured from syslog and trap viewer and matching the desired argument of either syslog or trap. It...
View ArticleWill there be a delay in IPmonitor to generate alerts and send emails??
Hi, I have a query with regards to the email alert >> query for token Monitordownlength gave me3.08 minutes when the alert was triggered.i.e. This was the first email I received when the alert...
View ArticleWrong server when clicking on (Manage Node) to add a node from Virtualization...
I recently have been tasked with updating our Orion / Solar Winds website NPM with updated info / servers etc.I just recently changed the management of a bunch of Hyper-v Servers to WMI that I had...
View ArticleClik here to view.
What is the diffrence between %processavg% and usage avg
Hi , What is the difference between the CPU Utilization average load of %processavg% and usage average we get with the query %monitorstatus% , rtt: 352ms; usage: 6.02%; usage-avg: 6.02%. Both give me...
View ArticleRe: Wrong server when clicking on (Manage Node) to add a node from...
I deleted the node and re-added it. It appears to be on the correct server right now. Guess Ill have to check all the nodes to make sure they are showing up correctly. I am still open to any...
View ArticlePercent (Utilization) Inquiry
Hello all,I would just like to get some clarification on some confusion regarding how to read the Top 25 Conversations in NetFlow. Please see attached for reference. On the column of Percent...
View ArticleGoogle Chrome 27.0.1453.116 EXE (Upgrade) package failed to install using...
Hello, I published the package Google Chrome 27.0.1453.116 EXE (Upgrade) to all WSUS servers without problems, all the machines get detected who needs the upgrade, but the upgrade failed with Error...
View ArticleRe: Alerts from NPM Source
This was actually a very simple one which was noticed after the alerts suddenly turning up after leaving the box alone for a few hours. It turned out the time was not syncing properly (time drift of...
View ArticleWhy IP and hostname field could not show up
Hi forum, We need to map IP and hostname in Port Detail Node. Now only Mac Address and VLAN show up.I installed IPAM ver 4.0 and UDT ver 3.0. Does they integrated to each other
View ArticleHow to monitor that a SNMP that it is working?
Hi, I would like to monitor the SNMP services are running in our environment but I am not able to find the best template to do so. Monitoring using the service monitoring would not be good as some SNMP...
View ArticleRe: What is the diffrence between %processavg% and usage avg
but i still cannot understand the last monitor status details, can you elaborately explain the terminology. Both thresholds, last value and short term, have been exceeded; rtt: 2154ms; usage: 85.86%;...
View ArticleRe: Report Writer question
Hi DanielleH, I would like to know if this feature is now available. I'd like to enable certain users to create new/custom reports, but not have them remote desktop into our Orion server.Is there any...
View ArticleSetting up Alerts
Hi All, Thanks for your assistance so far. Well, do we have tokens to fetch server information in the alert email. For example if i want to poll the server and fetch the CPU performance %, Memory...
View ArticleClik here to view.
Re: How to monitor that a SNMP that it is working?
I actually detect this when Volumes or Interface are not getting any statistics - no need to do any additional collection, you already have the data (or more like, you don't have the data you expect).
View ArticleSyslog server crashed - now logging not functioning as we need it to.
Good morningThe server that our Syslog application (V8.3.15) runs on crashed a few days ago and once we got it back up and running it (the Syslog application) stopped sending us email notifications of...
View ArticleRe: FTP Voyager GUI not showing Scheduler sites but they're still there.
Hi greyrocker, comment from the Dev team: It’s probably due to his OS upgrade. On Windows XP, the site profiles for Scheduler are going to be located in the installation directory. However, on...
View ArticleRe: What We Are Working On Post IPAM 4.0?
Hi Michal, Can we please get IPAM polling engines that can poll DHCP servers.We've got over a hundred domains that DON'T have a trust relationship and therefore, unable to be polled from the primary...
View ArticleRe: FTP Voyager randomly uploads multiple instances of tasks/actions
Hi greyrocker, According our Dev team - If you were running FTP Voyager 15 or old when installing 16, it’s a possibility that something went wrong with the data upgrade that’s causing this. You can...
View Article