Re: Monitor CRC error in cisco devices
Look at your output where it says "Last clearing of "show interface" counters 3d14h. As I said in my previous post, usually the only time SNMP counters (ie: what you poll via UnDP) and "show...
View ArticleRe: UDT3.1: What happened to UDT port discovery?
Any updates on this?? I've got nexus switches that have new cards slotted, I need to add the interfaces to UDT monitoring, not NPM monitoring and I'd prefer not to delete and re-add the node.
View ArticleRe: How best to use Package Boot Helper to copy a file?
However, the .xml file is not being copied when the .msi is installed.. There are two reasons this can happen:The command is defective and thus failing.The INSTALLER is not returning the correct result...
View ArticleAdding interfaces question
A additional card was added to a Juniper mx2020 router. Rediscovered the router and can see the new interfaces but SW will not allow me to add them to the configuration. I select List Resources, click...
View ArticleAvailability Event Report
Good afternoon! It is possible to create a report with the name of equipment, schedule of beginning of unavailability , to schedule the availability and total unavailability time? This would be very...
View ArticleRe: Linux Memory Utilization Monitors and You
In the interest of leveraging new NPM features, I've created a poller (not UnDP, but actual replacement poller) that you can use INSTEAD OF the built-in SolarWinds RAM poller that uses the "simpler"...
View ArticleCan I index some view on my intranet portal?
Can I index some view on my intranet portal?
View ArticleRe: NCM Real-Time Change Detection
For the ASA you should be able to use syslog messages 111005-111010 to accomplish what you want. It comes down to what syslog message you want to use to trigger the RTCN script.
View ArticleFTP Voyager command does not work?
I'm running this script on my PC1 with FTP Voyager version 16.2 but it does just open FTP voyager and DOES NOTHING. No file transfer at all.I checked and I do see 2 zip files inside d:\temp\ folder....
View ArticleClik here to view.
Re: How it works - Application's Component Availability
I changed it to BulkColumn on 12/19/2014 and the errors have reduced significantly. Thanks for all your help. Case# was 644272.
View ArticleRe: Is there anyway to export the GUI setup of one Orion server to populate...
Is there any known issues that it might cause having one template across all the server? Does it require any initial changes before having it fully functional apart from the cleanup of thing?
View ArticleRe: Is there anyway to export the GUI setup of one Orion server to populate...
If you're looking for a single interface, then your best bet is to look into the Enterprise Operations Console. This gives you a single pain of glass view without having to spend time configuring each...
View ArticleRe: (Instance Not Licensed) - does that mean that the monitoring has stopped...
If you are on DPA 9.0, the answer is yes. The monitoring user still exists, but no active connections will be established and no queries against that instance if not licensed.
View ArticleRules/Filters advanced refining
I have recently started my job as a Security Analyst position and we using Log and Event Manager ver. 6.0.1. I am learning all the deep capabilities of LEM on the go and as I go through the Rules and...
View ArticleRe: How to Backup Config of ADVA TDM?
BUMP...Heard today we might be adding some ADVA equipment [of some kind] to our network...
View ArticleRe: Adva MIBS for Orion NPM v9.5
We might be getting some of these at work -- any tips/pointers for managing them? thanks
View ArticleSNMP OID Monitoring
I'm coming across something I haven't seen before. I need to monitor an application running on a AIX server. I have identified OID that needs to be monitored. While doing verification it was noticed...
View ArticleRe: Is there anyway to export the GUI setup of one Orion server to populate...
Thanks Harvey for the suggestions. We will look into it and see if it is a possibility or requirement at the moment. We are trying to have a standard template to start off with and then go from there....
View ArticleDPA Mass Registration not working, SQL
Server (Name or IP)PortIs Windows Auth(Y/N)SysAdmin UserSysAdmin PasswordMonitoring UserMonitoring User PasswordCreate Monitoring User(Y/N)Repository TablespaceAdditional JDBC URL PropertiesAdditional...
View ArticleClik here to view.
Re: PowerShell Module based on the SDK
Michael,I see that there hasn't been much change in the module since you initially uploaded it. Is it in another location, such as Github?If not, and the project has gone stale, can I clone it over to...
View Article