Re: Help with Trigger Conditon
So are you saying that the build in alert does not work for you? How do you test it? Or are you just trying to get an email alert for this build in alert? If yes, I use the following for my transmit...
View ArticleRe: Change Footer Text on all Reports
For users, there is no direct way to do so, the report definitions are stored in database. User has no direct way to change some global properties shared across all reports. As a hack you can create a...
View ArticleClik here to view.
Issue in Backup of Nexus Switch
Hi,I am facing problem in taking backup of the Nexus Switch-Below is the error message Please suggest.Error message -Client LoadScriptFile:Script file not found.(E:\CatTools3\Scripts\.txt)
View ArticleRe: Connect refuse with any nDepth search in Log & Event Manager
Thanks for clarifying..Unfortunately, I'm still having the same issue..
View ArticleRe: How can I build a report that can list only nodes that are configured for...
Excellent I'll try it out thanks!
View ArticleRe: Re: Re: Orion alerts missing - Due to licensing ?
A few things to check- You have a long list of routers in the complex "any" condition. I am assuming the router in question is in that list, and you have verified that the router name displayed in the...
View ArticleRe: SNMP queries stopped working on Cambium products
Ah! This was an Engineer's Toolset issue, not a Network Performance Monitor issue
View ArticleClik here to view.
Re: hyper-v polling's side effects
Hi Balki 1429. Here is my node. Hyper-V polling not yet enabled. "Edit Node" is there. I do "List Resources", select "Hyper-V", and end up on "Virtualization Summary -> Hyper-V Host Details" now...
View ArticleRe: is there a better way to do this?
Yea, cannot put a delay on the reset action. You can probably set the reset action to execute only between 7am-7pm.
View ArticleClik here to view.
Re: hyper-v polling's side effects
Actually "Edit Node" and "List Resources" are there on the page in the "management" section, they just got pushed down outside of the viewable part of the UI (my monitor is 1680x1050 and the browser...
View ArticleHow do I delete old VMWare ESX servers from Storage Manager?
I've recently upgraded to Storage Manager 5.7 and really like the new Storage Manager Health Status screen. What it has picked up, is that I have lots (100+) of old "ghost" devices which are old...
View ArticleClik here to view.
Re: NCM Config - Router Username, Password and Enable password
Hi, in the WEB-Interface go to "Settings" then you get this page: After that click on NCM-Setting and go on Global Device Default to Connection Profiles: Hope you'll find it. Kind regards,Flo
View ArticleClik here to view.
Re: Deleting a node does not delete assigned pollers
Hello Example:Netobject V:33SUBSTRING(NetObject, 3, 10) = 33In that where clausule: 33 IN (SELECT VolumeId FROM DeletedVolumes) try match 33 in all VolumeId.It is ok. Probably in some way Volumeid was...
View ArticleRe: Why is my kiwi syslog cache folder growing every min?
In this version of Kiwi Syslog, web cache.bin files were created when the web database (SQL Compact with a 4GB limit) gets close to full. This has been resolved in later versions.
View ArticleRe: ipMonitor MIB's
In ipMonitor, custom MIBs will need to be created for you. Once you receive the MIBs, you will do the following: 1) Stop the ipMonitorSrv service.2) Rename your current mib_base.bxml file so that you...
View ArticleRe: How do I?...
Check for the steps under "Creating and Editing External Website Views" on NPM Admin Guide 1. Settings -> Customize Navigation & Look -> External Websites2. You might as well want to check...
View ArticleRe: Which interfaces do I really need to monitor?
For the cisco devices, I only monitor uplinks and any ports that have an "important" device on the other end. The device is added to the NPM database by its Loopback IP address. Anything you monitor,...
View ArticleRe: question for the Upload the config.
It is uploaded to the running config. Tick the box "Write to NVRAM" if you want to save it to the startup config as well.
View ArticleClik here to view.
Re: Importing list of devices
You need to use the Network Discovery to add in a large number of Nodes. You can see the following on the Add Node page.
View Article