Recently installed both and I just realized that most of my server (static addresses) are not in IPAM or NPM. Just to document how I got on this track is: I removed 2 devices from my network and the cable drops are to be removed, they were unmarked. So I thought, I'll just search IPAM to find the device, then locate the switch port using UDT. I can't find the device because the IP address is basically unknown to all of my SW products. Here's how my inherited network is setup. IP range 10.4.20.1/19. My missing IP's are in the exact range of 10.4.28.1-10.4.29.254. For the 10.4.20.1/19 subnet, DHCP is configured to handle 10.4.20.1-10.4.21.250. Is my problem due to the fact that my subnet is 10.4.20.1/19 but that entire scope is not within the DHCP range? If so, how should I go about fixing this? Should I enable the entire subnet for SHCP and then exclude the 10.4.28.1-10.4.29.250?
↧