hello,everyone:
I have a problem when add a Node to NPM v10.4.
I can add the node,but can't list any resources such as interterfaces.
surely,I try to scan use snmpwalk,it runs.
how can i solve this problem ? thanks~
[root@localhost ~]# snmpwalk -On -c public -v 2c 172.25.252.145
.1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.30970
.1.3.6.1.2.1.1.3.0 = Timeticks: (459340) 1:16:33.40
.1.3.6.1.2.1.1.4.0 = STRING: ICPlus
.1.3.6.1.2.1.1.5.0 = STRING: switch
.1.3.6.1.2.1.1.6.0 = STRING: ICPlus
.1.3.6.1.2.1.1.7.0 = INTEGER: 72
.1.3.6.1.2.1.2.1.0 = INTEGER: 16
.1.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
.1.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
.1.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
.1.3.6.1.2.1.2.2.1.1.4 = INTEGER: 4
.1.3.6.1.2.1.2.2.1.1.5 = INTEGER: 5
.1.3.6.1.2.1.2.2.1.1.6 = INTEGER: 6
.1.3.6.1.2.1.2.2.1.1.7 = INTEGER: 7
.1.3.6.1.2.1.2.2.1.1.8 = INTEGER: 8
.1.3.6.1.2.1.2.2.1.1.9 = INTEGER: 9
.1.3.6.1.2.1.2.2.1.1.10 = INTEGER: 10
.1.3.6.1.2.1.2.2.1.1.11 = INTEGER: 11
.1.3.6.1.2.1.2.2.1.1.12 = INTEGER: 12
.1.3.6.1.2.1.2.2.1.1.13 = INTEGER: 13
.1.3.6.1.2.1.2.2.1.1.14 = INTEGER: 14
.1.3.6.1.2.1.2.2.1.1.15 = INTEGER: 15
.1.3.6.1.2.1.2.2.1.1.16 = INTEGER: 16
.1.3.6.1.2.1.2.2.1.2.1 = STRING: physical port 01
.1.3.6.1.2.1.2.2.1.2.2 = STRING: physical port 02
.1.3.6.1.2.1.2.2.1.2.3 = STRING: physical port 03
.1.3.6.1.2.1.2.2.1.2.4 = STRING: physical port 04
.1.3.6.1.2.1.2.2.1.2.5 = STRING: physical port 05
.1.3.6.1.2.1.2.2.1.2.6 = STRING: physical port 06
.1.3.6.1.2.1.2.2.1.2.7 = STRING: physical port 07
.1.3.6.1.2.1.2.2.1.2.8 = STRING: physical port 08
.1.3.6.1.2.1.2.2.1.2.9 = STRING: physical port 09
.1.3.6.1.2.1.2.2.1.2.10 = STRING: physical port 10
.1.3.6.1.2.1.2.2.1.2.11 = STRING: physical port 11
.1.3.6.1.2.1.2.2.1.2.12 = STRING: physical port 12
.1.3.6.1.2.1.2.2.1.2.13 = STRING: physical port 13
.1.3.6.1.2.1.2.2.1.2.14 = STRING: physical port 14
.1.3.6.1.2.1.2.2.1.2.15 = STRING: physical port 15
.1.3.6.1.2.1.2.2.1.2.16 = STRING: physical port 16