Clik here to view.
Re: WebHelpDesk. If not enough techs in the licence?!
I would imagine it chooses by order of creation. Those that were created last would be the first disabled.
View ArticleRe: Send group members statu on alert
There's not a way to embed an entire report, and the SQL variables you could do one to pull the names and another to pull the status, but they'd be in corresponding rows and not a table. What you may...
View ArticleRe: UCS host seen as a Wireless Controller with no volumes
Go into Settings and Views by Device type and change the UCS servers from Wireless Controller to default to pull up the expected view. You should be able to see the disks then, especially if you have...
View ArticleRe: Possible to Analyze Traffic By Destination Country?
Hey there, I'm just getting into NTA myself, but this was one of the main things I wanted to do, what you can do is setup a filtered view:Use the flow navigator on the left hand side of the screen...
View ArticleRe: How do I export all raw data from Logs/Data?
Makes sense, but this was a security audit and we really wanted them to examine LEM data. Don't think they would use LEM though...
View ArticleRe: Tell us your "Unknown" devices!
1.3.6.1.4.1.6889.1.35 Avaya Inc. Aura System Manager1.3.6.1.4.1.6889.1.36 Avaya Inc. Aura Session Manager1.3.6.1.4.1.6889.1.8.1.58 Avaya Inc. Aura...
View ArticleRe: UCS host seen as a Wireless Controller with no volumes
I would like to know if you are actually getting volume information from UCS blades. As far as I know, drive information cannot be displayed from UCS in NPM without doing a custom poller and view. If...
View ArticleRe: Tell us your "Unknown" devices!
1.3.6.1.4.1.14823.1.1.32 Aruba Networks Inc. Aruba 7210 wireless controller1.3.6.1.4.1.14823.1.1.33 Aruba Networks Inc. Aruba 7220 wireless controller1.3.6.1.4.1.14823.1.1.34...
View ArticleRe: UCS host seen as a Wireless Controller with no volumes
Let me check our UCS servers and I'll let you know what I can see.
View ArticleClik here to view.
Re: Trend chart doesn't reflect Daily chart
Maybe it could be worded better in the hover/tool-tip. In the second view, "Total Wait Time for Time Period" is reporting the wait time for the whole bar you are hovering over (including all swatches...
View ArticleRe: Java 7 to Java 8 Upgrade Package
One reason I could see not sending a blanket uninstall command would be that you do not want the uninstall to occur if the Java 8 install has not yet happened. The mass uninstall command does not have...
View ArticleRe: Is it possible to change the default subject line of an e-mail alert in DPA?
OK, so bad news on this one as of right now there isn't a way to change the subject line. This would be a great feature request. Database Performance Analyzer Feature Requests
View ArticleRe: Java 7 to Java 8 Upgrade Package
One reason I could see not sending a blanket uninstall command would be that you do not want the uninstall to occur if the Java 8 install has not yet happened.Okay, so build a Patch Manager Computer...
View ArticleI need a report on what servers are using SNMP for monitoring
I'm converting all my monitoring to WMI but need a report to tell me which ones are left on SNMP.
View ArticleRe: NPM v12 Beta2 Now Available
Also, it would be important to have and ability to manually turn ON/OFF this "automatic" process. I have a solution in place already and would not want my nodes to be displaced randomly based on...
View ArticleRe: NPM v12 Beta2 Now Available
Indeed - there is an option in the beta to turn off the automatic geolocation. We would very much like to support CP-based geolocation, but likely will not be in this version.
View ArticleRe: DMVPN and QOS
What I've done is use VNQM to monitor my call QoS and then I will load a load a link down with Ostinato for a few monitoring cycles. I get a good idea of how my network reacts to heavier load that...
View ArticleWanting to find devices not configured in NCM
Running NCM 7.3.2. On a previous version there was a screen where I could click on a vendor (Cisco) and I would be shown which devices were being managed by NCM. I cannot find that information in my...
View ArticleRe: Wanting to find devices not configured in NCM
I'd like to add a correction "I would be shown which devices were and were not being managed by NCM". I'm hoping to find devices that were added to NPM but not added to NCM.
View Article