Re: We were unable to connect to any of your WWW addresses listed
I'm not entirely understanding what it is that you're doing to get this result.What data is being entered into which field(s)?
View ArticleClik here to view.
Re: We were unable to connect to any of your WWW addresses listed
open 144i.com in a browser an I get this .I don't know why it cannot open the index.html Index of /NameLast modifiedSizeDescriptionApache/2.2.16 (Debian) Server at 144i.com Port 80
View ArticleRe: We were unable to connect to any of your WWW addresses listed
Okay... what does 144i.com have to do with DNSStuff.com issues? except that you're hosting the site? The fact that a webserver responded to the domain name is prima facie evidence that DNS is working...
View ArticleRe: NPM Charting
Think we have narrowed this down the VM's security settings. This box being in a closed environment there are several security settings applied to it that we think may have broke it. Our plan now is to...
View ArticleRe: Monitor Vcenter with Engineers tools set
HI Senthil Thanks for your help . I managed to setup the SNMP Trap receiver to receive traps from our vcenter. Now the question how do I configure the SNMP trap receiver to send me emails about the...
View ArticleRe: Trigger event in Serv-U? Able to make the user see the event?
That's a tricky one, especially since Serv-U events aren't really built to have a lot of outstanding asynchronous calls. If I was designing this one, I'd probably set my events up to dump as much...
View ArticleRe: Fake Alert Issue
HI Kiran, Try to do some troubleshooting.1. Try to ping and traceroute the nodes that orion says "is down" from the Polling server (orion server) where that node is assigned. and then vice versa2....
View ArticleRe: Change Date format in console
Virtualization Manager v6 has been released and still no ability to change the date format.Has this been pushed to low priority?
View ArticleRe: Get error when run get-swisdata $Swis
Hello, according to your console output I assume you are using SQL management libraries (not functionality of SDK), but in case of SQL commands you need to create new object for SQL Command, which will...
View ArticleRe: IPAM - Can only use "main" poller?
Hi, it's our existing feature request. We typically use additional polling engines because of increase of polling capacity/performance. In case of IPAM we don't have to solve this problem on polling...
View ArticleRe: What could be causing my NPM server CPU utilization demands, Memory and...
We've fixed the problem with CPU spikes in NPM 10.6 RC so I would recommend to try this updated.rgward has mentioned that here: http://thwack.solarwinds.com/ideas/2610 If you would like to complete...
View ArticleClik here to view.
Re: Solarwind can't collection data.
Actually, when I checked the system for your question, I noticed that I now have temperature graph (from last 7 days only, but nothing beyond that, don't know why). It's quite obvious that I cannot get...
View ArticleRe: Unable to contact Thwack server
If I remember correctly, earlier there was option in IIS settings (probably 2003 Server?) where I could put the proxy address, so those banners worked. But in some point (in updates to Server 2008 R2?)...
View ArticleClik here to view.
Wireless heatmaps
We know that NPM is good in basic wireless use cases (fault monitoring). And we know you also using other tools like WCS or standalone applications for more wireless monitoring/management. One of the...
View ArticleRe: NPM 10.6 RC2 IS HERE - UNDP ON MAPS, NEW OPENSTREET MAPS, NEW REPORTING
Hi Radie,thanks for feedback. We will take a look on this and validate. Michal
View ArticleRe: Dividing by 100 in transform poller
Hi,this is possible to achieve with transformed poller.- When creating transformed poller make sure that Polling interval is the same for (Universal Device Poller)UnDP and for transform poller. Make...
View ArticlePolling for IOS Feature set
As I see Cisco using a "Universal" image more and more, I need some way to identify the active license/feature set on my IOS devices. Is that information already pulled in or do anyone have any hints...
View ArticleClik here to view.
Re: Conditional Alerting on Multiple WPM Transactions (Dependencies)
Hello,this kind of alert can't work for one reason - alert conditions are always evaluated against single object (transaction) at a time. If you have "Name = A and Name = B", condition can never be...
View ArticleRe: Universal Poller without seperate Transform
Hi David, can you post screenshot of what exactly you see on the web? You have to have both pollers assigned to the device (node) if you want to see transform poller but you dont have to display both...
View Article