VRF in NPM 10.7

Hi,

I have the following issue with NPM 10.7 and VRF awareness. Having this new feature is great, we have been asking for it for a while. However the resources to display the information cannot be changed / customized. It is based on the ROUTE DISTINGUISHER and should really allow you to sort the info based on VRF NAME or Route Target. The reason for this is commonly in large VRF deplayments the ROUTE DISTINGUISHER is the loopback of the device and differant for each node. It would be great to see a resource that lets you see where the VRF extends over an entire network with the ability to have granularity. Hopefully this will be improved upon soon as its fairly meaningless info a the moment as you can see below.

I am going to start looking at what the report writer can do. Anyone else working on this?

ROUTE DISTINGUISHER	VRF NAME	RECORDS
N/A		48
10.0.1.1:1020		1
10.0.1.1:666		1
10.0.1.10:1020		1
10.0.1.10:666		1
10.0.1.11:1020		1
10.0.1.11:666		1
10.0.1.12:1020		1
10.0.1.12:666		1
10.0.1.2:1020		1
10.0.1.2:666		1
10.0.1.3:1020		1
10.0.1.3:666		1
10.0.1.4:1020		1
10.0.1.4:666		1
10.0.1.5:1020		1
10.0.1.5:666		1
10.0.1.6:1020		1
10.0.1.6:666		1
10.0.1.7:1020		1
10.0.1.7:666		1
10.0.1.8:1020		1
10.0.1.8:666		1
10.0.1.9:1020		1
10.0.1.9:666		1
10.4.6.18:2047		1
10.4.6.2:2047		1
10.4.6.2:510		1
10.4.6.2:520		1
10.4.6.2:530		1
10.4.6.2:540		1
10.4.6.2:550		1
10.4.6.3:2047		1
10.4.6.3:510		1
10.4.6.3:520		1
10.4.6.3:530		1
10.4.6.3:540		1
10.4.6.3:550		1
10.4.6.4:2047		1
10.4.6.4:510		1
10.4.6.4:520		1
10.4.6.4:530		1
10.4.6.4:540		1
10.4.6.4:550		1
10.4.6.5:2047		1
10.4.6.5:510		1
10.4.6.5:520		1
10.4.6.5:530		1
10.4.6.5:540		1
10.4.6.5:550		1
10.4.6.6:2047		1
10.4.6.6:510		1
10.4.6.6:520		1
10.4.6.6:530		1
10.4.6.6:540		1
10.4.6.6:550		1

Ollie